联系我们

名称:保定市高速高铁六角护坡模具厂

电话:xxx

手机:13313028229

邮箱:xxx

地址:xxx

新闻动态
所有的塑料模具所用的原材料
所有的塑料模具所用的原材料都是一级新料,不加粉碎回料,所以不要市面上用粉碎回料做的模具,使用粉碎回料做的模具使用寿命短,容易老化,变形.表面不平整,水泥件不容易脱模.购买请慎重.
All the raw materials used in plastic moulds are first-class new materials, without crushing and recycling, jinggaim.75ix.cn jianchajingm.75ix.cn hupo.75ix.cn jiancha.75ix.cn hulan.75ix.cn huafenchii.75ix.cnso don't use crushing and recycling moulds on the market. The moulds made with crushing and recycling have short service life, easy aging and deformation. The surface is uneven, and the cement parts are not easy to demould. Please be careful in purchasing.
一.不要比重量,切割开塑料模具可以比较一下产品壁厚。通过回收来的粉碎回料,经过粉碎后始终还带有水泥浆粉,在同样的钢模注塑成型下,做出来的产品只有重,不会轻.
1. Don't compare the weight. Cut the plastic mould to compare the wall thickness of the product. The recycled crushing material always contains cement slurry powder after crushing. Under the same steel injection moulding, the product is only heavy, not light.
二.不要过于比较价格,买2个40元钱的模具还不如1个50元钱的模具耐用,做出来的水泥件尺寸稳定,又不外膨胀,不存在产品不合格的风险。
2. Don't compare prices too much. Buying two 40 yuan moulds is not as durable as one 50 yuan moulds. The size of the cement parts made is stable and expands. There is no risk of unqualified products.
三、粉碎回料做的塑料模具,表面有很多黑点,

化粪池模具 精密铸造 钢纤维 盐水注射机 风电基础模具 nsk轴承经销商 nsk轴承总代理 保定空调移机

浑浊不光亮,加力变形大。
3. Plastic moulds made of crushing and recycling materials have many black spots on the surface, which are cloudy and not bright, and have large afterburning deformation.
四、模具产品外观不要有很多飞边毛刺,有刀销的痕迹。影响产品外观是钢模注塑的原因,钢模开不好,塑料模具质量也好不到哪里去。
Fourth, the appearance of die products should not have many burrs on the flying edge, and there are traces of knife pins. Influencing the appearance of products is the reason of steel injection molding. The quality of plastic mold is not as good as that of steel mold

联系方式

  1. 名称:保定市高速高铁六角护坡模具厂
  2. 电话:xxx
  3. 手机:13313028229
  4. 邮箱:xxx
  5. 地址:xxx

版权 © 保定市护坡模具厂 网址:www.hupomoju.cn  推荐:阶梯护坡模具,拱形护坡模具,排水槽模具,消浪块模具

网站建设及优化保定遨游网络公司